Paraglider Maintenance & Repairs

At 406 Paragliding, we are an APPI Licensed Paraglider Maintenance Shop providing professional paraglider inspections, maintenance, and repairs to help keep your equipment in good condition and performing as intended.

Located in Belgrade, Montana, near Bozeman, our workshop offers canopy and fabric repairs, suspension line replacement, precision laser trimming, wing inspections, and reserve parachute repacking.

Our maintenance services follow established inspection and repair procedures, with careful attention to manufacturer specifications, equipment condition, and pilot safety.

Whether your paraglider needs routine maintenance, a detailed inspection, or repairs following damage, we’re here to help you maintain your equipment and fly with confidence.

At 406 Paragliding, our APPI Licensed Maintenance Shop provides professional paraglider canopy and fabric repairs. From small tears to more extensive damage, we carefully evaluate each wing and use appropriate repair materials and techniques to help restore its condition.

Our canopy repair services include:

• Repair of small tears, punctures, and damaged fabric panels.
• Ripstop fabric patches and reinforcement repairs.
• Repair of damaged or separated seams.
• Leading-edge and trailing-edge fabric repairs.
• Inspection and repair of suspension line attachment points.
• Inspection of internal ribs and structural fabric components.
• Evaluation of canopy damage to determine appropriate repair options.

We use compatible repair materials and follow applicable manufacturer recommendations. Repairs are evaluated individually based on the location, extent, and type of damage.

Have a damaged paraglider? Contact 406 Paragliding at 406-539-5118 or 406paragliding@gmail.com to discuss your repair needs. Photographs of the damaged area are helpful when requesting an estimate.

BEFORE — Damaged Leading Edge

AFTER — Completed Paraglider Repair

At 406 Paragliding, our APPI Licensed Paraglider Maintenance Shop provides professional suspension line inspection, repair, and replacement services.

Over time, paraglider suspension lines can shrink, stretch, become damaged, or lose strength. These changes can affect the wing’s designed trim, inflation characteristics, handling, and overall performance.

Our suspension line services include:

• Replacement of broken, damaged, or worn suspension lines.
• Custom fabrication of replacement lines using appropriate line materials and manufacturer specifications.
• Replacement of upper, middle, lower, and stabilo lines.
• Inspection of line attachment points, loops, and connections.
• Brake line replacement and adjustment.
• Suspension line length measurements and comparison with manufacturer specifications.
• Non-destructive line strength testing.
• Inspection of risers, maillons, and line connections.

Replacement Lines Made In-House

We manufacture replacement paraglider lines in our workshop using appropriate line materials, dimensions, and construction methods. Individual replacement lines are available for installation at our shop or shipment directly to customers.

Precision Laser Trimming

When suspension lines change length unevenly, the wing’s trim can move outside the manufacturer’s specifications. Our precision laser trimming service measures line lengths and identifies adjustments needed to help restore the wing’s intended trim.

Need replacement lines or a line inspection?

Contact 406 Paragliding at 406-539-5118 or 406paragliding@gmail.com.

Visit our Replacement Paraglider Lines page to request individual replacement lines.

At 406 Paragliding, our APPI Licensed Paraglider Maintenance Shop provides precision laser trimming and comprehensive wing inspections to help maintain your paraglider’s intended performance, handling, and safety.

Over time, suspension lines can shrink or change length unevenly, altering the wing’s designed profile and trim. These changes may affect inflation, handling, speed, and overall flight characteristics, even when the wing appears to be in good condition.

Our laser trimming and inspection services include:

• Precision laser measurement of suspension line lengths.
• Comparison of measured line lengths with manufacturer specifications.
• Evaluation and adjustment of wing trim.
• Inspection of suspension lines, risers, and attachment points.
• Fabric porosity testing to evaluate air permeability.
• Fabric strength testing using appropriate inspection equipment.
• Non-destructive suspension line strength testing.
• Inspection of canopy fabric, seams, ribs, and reinforcement areas.
• Brake line length and adjustment checks.
• Inspection of leading-edge support rods and structural components.

When Should Your Paraglider Be Inspected?

We recommend following your manufacturer’s inspection schedule. Many manufacturers recommend an initial trim inspection after approximately 30 hours of flying, followed by periodic inspections based on flight hours, age, and operating conditions.

For more information about paraglider inspection requirements, line measurements, fabric strength, and porosity testing, see BGD’s official Paraglider Inspection Recommendations.

You should also consider an inspection when purchasing a used paraglider, following significant damage, or if you notice changes in inflation, handling, or flight performance.

Learn More About Our Laser Trimming Services

For detailed information about our inspection procedures, available services, and pricing, visit our Paraglider Laser Trim & Line Maintenance page.

Contact 406 Paragliding at 406-539-5118 or 406paragliding@gmail.com to schedule an inspection or discuss your wing’s maintenance needs.

At 406 Paragliding, we provide professional reserve parachute inspection and repacking services for paraglider pilots.

Your reserve parachute is an essential piece of emergency equipment. Regular inspection and repacking according to the manufacturer’s recommendations help maintain its condition and readiness for deployment.

Our reserve parachute services include:

• Inspection of reserve canopy fabric, lines, and attachment points.
• Inspection for visible damage, wear, and contamination.
• Inspection of reserve bridles and connections.
• Repacking of compatible round, square, and steerable reserve parachutes.
• Inspection of deployment bags and compatible components.
• Checking reserve installation and compatibility with the harness manufacturer’s instructions.
• Documentation of inspection and repacking dates.

How Often Should Your Reserve Be Repacked?

Repacking intervals vary by manufacturer and model. Always follow your reserve parachute manufacturer’s instructions. Some reserves require repacking every six months, while others specify annual intervals.

Schedule Your Reserve Repack

Contact 406 Paragliding at 406-539-5118 or 406paragliding@gmail.com to schedule your reserve parachute inspection or repacking.

At 406 Paragliding, our APPI Licensed Paraglider Maintenance Shop provides inspections of paragliding harnesses and related equipment to help identify wear, damage, and potential safety concerns.

Harnesses, risers, connectors, and other equipment are subjected to repeated loading, abrasion, and environmental exposure. Periodic inspections can help identify problems before they become more serious.

Our harness and equipment inspection services include:

• Inspection of harness webbing, stitching, and structural attachment points.
• Inspection of leg straps, chest straps, shoulder straps, and buckles.
• Inspection of carabiners, maillons, and other connectors for visible wear or damage.
• Inspection of paraglider risers, stitching, and attachment loops.
• Inspection of speed bar systems, pulleys, and associated lines.
• Inspection of reserve parachute compartments, deployment handles, and deployment systems.
• Inspection of harness fabric, protective components, and areas subject to abrasion.
• Evaluation of equipment condition and recommendations for repair or replacement.

Equipment Safety & Manufacturer Recommendations

Our inspections are intended to identify visible wear, damage, and maintenance concerns. Equipment is evaluated according to applicable manufacturer recommendations. Some damaged or worn components may require replacement rather than repair.

Schedule an Equipment Inspection

Contact 406 Paragliding at 406-539-5118 or 406paragliding@gmail.com to discuss your harness or equipment inspection needs.

At 406 Paragliding, we welcome local pilots and customers from across the United States who need professional paraglider maintenance, inspections, and repairs.

Our APPI Licensed Paraglider Maintenance Shop is located in Belgrade, Montana, near Bozeman and the Bridger Mountains.

Local Equipment Drop-Off

Customers in Southwest Montana can arrange to drop off their paragliders, reserves, harnesses, and other equipment at our workshop.

Please contact us in advance to schedule a drop-off appointment.

Shipping Your Equipment to Our Shop

If you are located outside our area, you can ship your equipment to us for inspection, maintenance, or repair.

Before shipping:

• Contact us to discuss the services you need.
• Provide your paraglider’s manufacturer, model, size, and approximate age.
• Describe any known damage, handling concerns, or maintenance history.
• Include your name, phone number, email address, and requested services.
• Pack your equipment securely in a suitable shipping box.
• Contact us before shipping to confirm arrangements and estimated turnaround time.

Repair Estimates

Repair costs depend on the type and extent of damage, required materials, and labor. Photographs of damaged areas are helpful for an initial estimate. Final pricing may require an in-person inspection.

Contact 406 Paragliding

Workshop Address: 245 Rivers Run Road, Belgrade, MT 59714

Phone: 406-539-5118

Email: 406paragliding@gmail.com

Please contact us before visiting or shipping equipment so we can coordinate your service.